We are the renowned Manufacturer, Exporter & Supplier of high-performance Plastic Water Tank Machine. It is widely used to manufacture water tank moldings. It is designed by our experts using high-grade parts and components in our advanced manufacturing facility. Our machine is in tandem with the set norms and thus it is appreciated for its increased output, low maintenance cost, and high abrasion resistance.
Features of Plastic Water Tank Machine
- 200 Ltr up to 15000 Ltr.
- 3,4,5 Layer Machine.
- Best Tank Design.
Specifications of Plastic Water Tank Machine
- Material HDPE
- Max. product volume: L 2000
- Voltage: 415V
- Total weight: 60T
- Total power KW: 517
- Average energy consumption KW: 310
- Machine dimension (LxWxH) m : 11 x 6 x 7.5
- Auto Feeder
- Loading method Spring loaded Stable performance, easy
- Motor KW: 1.1/1.1/1.1/1.1 maintenance
The operation of blow molding machine is directly related to the quality of blow molding products. Good operation process and operation can bring very good results to blow molding production.
The trial production operation of the largest blow molding machine:
- Open the machine:
- the opening of the cylinder and the die head part of the cooling water.
- set the heating temperature of each section and hold it for half an hour before starting.
- the lubricating grease is added to the transmission part of the equipment.
- check the retarder oil level window.
- connect the gas source switch and adjust to the proper pressure.
- connect the die frozen water.
- a proper amount of material is added to the hopper.
- prepare the operating tools for the processing of the products.
- wear good labor supplies.
- Test machine:
Begin the oil pump, check the uprightness of the machine, press the leader of the bite the dust and blow the air, check the pipe to be associated, attract the center as indicated by the activity, check whether the activity is right.
Beginning the recurrence converter as per the principle expelling material, setting fitting information in the plasticizing amount is to begin the stranded material. After the material is done, the divider thickness is seen by the launch catch. On the off chance that the divider thickness isn’t uniform, the nut is utilized to make the material type.
As per the quality prerequisites, the divider thickness of the fetus, the length of the launch, the blow time of the kick the bucket head, the blowing time of the format, the water-powered weight and the shaping temperature are balanced, and the machine is set to ordinary working condition after the creation is typical.